IM30-GLF
Doc. N° MO-0062-ING
Rev.
3
Date
14.02.2005
Copyright 2010 - Microener
Firmware:
2.0X
Pag
27
of
31
21. DIRECTION FOR PCB'S DRAW-OUT AND PLUG-IN
21.1 - Draw-out
Rotate clockwise the screws
and
in the horizontal position of the screws-driver mark.
Draw-out the PCB by pulling on the handle
21.2 - Plug-in
Rotate clockwise the screws
and
in the horizontal position of the screws-driver mark.
Slide-in the card on the rails provided inside the enclosure.
Plug-in the card completely and by pressing the handle to the closed position.
Rotate anticlockwise the screws
and
with the mark in the vertical position (locked).
