IM30-DK
Doc. N° MO-0040-ING
Rev.
2
Pag.
30
of
34
Copyright 2010 - Microener
22. DIRECTION FOR PCB'S DRAW-OUT AND PLUG-IN
22.1 - Draw-out
Rotate clockwise the screws
and
in the horizontal position of the screws-driver mark.
Draw-out the PCB by pulling on the handle
22.2 - Plug-in
Rotate clockwise the screws
and
in the horizontal position of the screws-driver mark.
Slide-in the card on the rails provided inside the enclosure.
Plug-in the card completely and by pressing the handle to the closed position.
Rotate anticlockwise the screws
and
with the mark in the vertical position (locked).
