Page 12
You can program the microcontroller with UART bootloader which
is pre programmed by default. To transfer .hex file from a PC to
MCU you need bootloader software (
mikroBootloader
) which
can be downloaded from:
After the mikroBootloader software is downloaded unzip it to
desired location and start it.
http://www.mikroe.com/downloads/get/1669/
mikromedia_xmega_bootloader_v101.zip
Programming with mikroBootloader
Figure 3-2: mikroBootloader window
01
When you start mikroBootloader software, a window
as shown in
Figure 3-2
should appear
mikroBootloader software