MC30-X/10-4
Doc. N°
MO-0350-ING
Copyright 2016
FW: 1211.37.06.x
Date
17.06.2022
Rev.
3
Pag.
22
of
43
5. Output Relays
5.1 - RelayCfg (Rel
ay Configuration only via Software “MSCom”)
The firmware can manage up to 7 output relays; among these, 4 output relays are available on the relay main
module, the remaining are available on additional expansion (Optional) modules controlled via the CAN-Bus
communication channel.
As an option (to be required when ordering the relay), the output relay “R4” can be replaced by a Field Bus
output (CANBUS) that controls additional I/O modules for increasing as needed the number of user
programmable Output Relays and Digital Inputs controlled from the relay.
UX10-4
Module (Board 1)
= 10 Digital Inputs - 4 Outputs Relay
The interfacing software “
MSCom2
” also allows to program the operation of the o
utput relays (Physical
Output).
5.1.1
–
Output Relay
0.R1
Programmable
Available on the relay
(if is present expansion module 0.R4 is not available)
0.R2
0.R3
0.R4
1.R1
Programmable
Output Relays on
Expansion Board
(Optional)
1.R2
1.R3
1.R4
5.1.2
–
“OutCfg”
Outputs Configuration - via MSCom2 software
5.1.2.1
–
“Example”
5.1.2.2
–
“Relay”
Relay internal name
5.1.2.3
–
“Output Configuration”
Normally Deenergized
The output relay is deenergized in normal conditions and gets energized on
activation of the controlling Functional Output; reset means deenergizing.
Normally Energized
The output relay is energized in normal conditions and gets deenergized on
activation of the controlling Functional Output; reset means energizing.