INSTALLATION GUIDE
Thank you for purchasing MICRODIA FlashMover
®
23-in-1 USB
2.0 Reader. This FlashMover
®
23-in-1 USB2.0 Card Reader
works with USB enabled Microsoft Windows 98, 98SE, ME,
2000, XP or above and Mac OS 9/X and higher systems. This
installation guide contains all the information you need to
install your FlashMover
®
23-in-1 USB2.0 Card Reader.
For Windows Users
To install the FlashMover
®
23-in-1 USB2.0 Card Reader on Windows 98/98SE/2000:
1.
Do not plug the card reader into the PC USB port before the installation is completed.
2.
Download the driver from www.microdia.com or insert the Driver CD in the CD-ROM drive.
3.
Double click the [Autorun.exe] after downloading or the CD-ROM will auto-run and follow [Install Wizard] installation
instruction.
4.
After installation, reboot your computer.
5.
Plug in your card reader into the USB port.
6.
There are 4 new removable drives added to your computer.
7.
Insert flash memory cards to access files in your cards.
NOTE: Please check MICRODIA
®
website, www.microdia.com, for downloading the latest driver.
To install the FlashMover
®
23-in-1 USB2.0 Card Reader on Windows ME/XP:
1.
Plug the card reader into your computer USB port.
2.
It is fully Plug-&-Play for Windows ME/XP, no driver installation needed.
3.
4 new removable drives are added to your computer after plug in the card reader.
4.
Insert flash memory cards to access files in your cards.
For Macintosh Users
To install the FlashMover
®
23-in-1 USB2.0 Card Reader on Mac OS 9.X
1.
Do not plug the card reader into the USB port before the installation is completed.
2.
Download the driver from www.microdia.com or insert the Driver CD in the CD-ROM drive.
3.
Double click [Installer] and follow the [Install Wizard] installation instruction.
4.
After installation, plug in your card reader into the USB port.
5.
There are 4 new removable drives added to your computer.
6.
Insert flash memory cards to access files in your cards.
NOTE:
-
Please check MICRODIA
®
website, www.microdia.com, for downloading the latest driver.
-
Please go to Mac website to update the latest version of Mac OS.
To install the FlashMover
®
23-in-1 USB2.0 Card Reader on Mac OS 10.X and above
1.
Please go to Mac OS website for upgrading to Mac OS X 10.1.2, then OS X will automatically detects the card reader.
Removing your flash memory cards from the FlashMover
®
23-in-1 USB2.0 Card Reader
To remove the flash memory cards on Windows system
1.
Close any files that are opened and reside on the flash memory cards.
2.
You can remove your cards safely after the LED stop blinking
To remove the flash memory card on Mac system
1.
The flash memory cards must be [EJECTED] or [UN-MOUNTED] by dragging the card’s disk icon in the trash.
CAUTION: Failure to properly [EJECT] the card before removing the card from the card reader could case data
loss or corruption.
