Chapter 5
- Setting Up the ADSL Router (Basic Mode)
The basic tabs consist of features which are catered for basic users.
will guide you through your ADSL Router’s configuration. The ADSL Router is shipped with a
standard PPP configuration..
o configure your ADSL Router, open your web browser. You may get an error message at this point; this
is normal.
1.
2.
Pr
Note…
This section
5.1
Logging into your ADSL Router
T
Type the default IP address (
192.168.1.1
) or
login.router on
on the web address bar.
ess the
Enter
key and the following screen will appear.
Before setting up your ADSL Router, make sure you have followed the easy start
guide. You should have your computers configured for DHCP mode and have proxies
disabled on your browser. Upon accessing the ADSL Router, if the browser still
displays a login redirection screen, you should check your browser's setting and
ensure that the JavaScript support is enabled. If the screen shown in Figure 1-3 is
not attainable, you must delete your temporary Internet files to clear the web cache.
Upon entering the default IP address or the short-cut name (login.router), if the user is first time login, the
user will be brought to the “Setup Wizard” page. See
Fig 1.3
Figure 1-3 : Setup Page
If you are not logging in for the first time, the router will direct you to the “Home Page”.
Fig 1-4
See
