Microcom 814M, Setup Manual

Page: 6 / 16

814M WINDOWS SETUP GUIDE 5
Buttons and Status LEDs
Buttons:
- CUTTER
o
Press to test the cutter. When pressed, a small amount of paper will be fed
through and then cut.
- FEED
o
Hold to manually feed paper through the printer. Hold while powering up to print
a test form.
- RESET
o
Reset the printer.
LEDs and Status Codes:
- PAPER
o
Solid Red

Paper not loaded

Low stock sensor not connected ( ERROR will also flash in this case)
- ERROR
o
Slow flashing

Low stock sensor not connected
o
Flashes twice

No paper detected
o
Flashes three times

Top cover is open
o
Flashes four times

Paper loaded incorrectly
o
Flashes five times

Over voltage
o
Flashes six times

Over temperature
- POWER
o
Solid green

Indicates the printer is powered on