IMPORTANT -‐ TO ENSURE CORRECT OPERATION OF YOUR MINISTAT PLEASE
READ THE GUIDE BEFORE COMMENCING INSTALLATION
Ministat User Guide
Correct temperature reading
The temperature sensor encased in the black sheath is very accurate.
Having set the desired temperature on the thermostat and positioned
the sensor in its required location the temperature of the air will be
controlled accurately at the position of the temperature sensor.
The temperature nearer the heater (from the sensor position) will be
hotter and further away from the heater it will be cooler.
Please note that when using a thermometer to check the temperature
unless it is in exactly the same position as the thermostat sensor there
will be a discrepancy due to the positioning of the thermometer.
Warranty
Used in accordance with these instructions this thermostat will give
many years of trouble free service.
The thermostat is guaranteed for five years from the date of purchase
against faulty parts and workmanship. In the unlikely event of a
failure, return it to Microclimate International Ltd together with a
receipt or proof of purchase and a brief description of the fault. If
returned within one year there will be no charge, after this time a
charge of £5 will be made for administration and postage. Please
enclose a cheque or postal order made payable to Microclimate
International. Cash is also accepted.
No liability is accepted other than for the repair or replacement of a
faulty product.
This does not affect your statutory rights.
Microclimate International
Unit 4 Wombourne Enterprise Park
Bridgnorth Road
Wombourne
England
United Kingdom
WV5 0AL
Tel : 01902 895351
Fax : 01902 897613
www.microclimate.co.uk
Ministat 100
The Ministat 100 is designed specifically to control non light emitting
heat sources such as heat mats with a power output up to and
including 100w.
Ministat 300
The Ministat 300 is capable of controlling any heat source with a
power output up to 300w. This may include heat mats, bulbs and
ceramic heaters.
WARNING DO NOT OVERLOAD YOUR MINISTAT MODEL BY
CONNECTING HEAT SOURCES WITH OUTPUTS GREATER
THAN STATED ABOVE FOR YOUR SPECIFIC MODEL.
DAMAGE FROM OVERLOADING IS EXEMPT FROM
GUARANTEE.