WINC1500 PICtail
TM
/PICtail Plus Daughter Board User’s Guide
DS70005309A-Page 20
Advance Information
2017 Microchip Technology Inc.
FIGURE 3-1:
WINC1500 DAUGHTER BOARD PLUGGED INTO PIC18
EXPLORER BOARD
3.2
PLUGGING INTO EXPLORER 16 DEVELOPMENT BOARD
The WINC1500 PICtail/PICtail Plus Daughter Board can be plugged into the Explorer
16 Development Board, as illustrated in
.
The WINC1500 daughter board with 30-pin card edge connector can be plugged into
the top (pin 1-30) of the PICtail Plus connector. This will connect the WINC1500 module
to the SPI Port 1 on the PIC microcontroller that is plugged into the PIM socket. If the
daughter board is plugged into the mid-section of the PICtail Plus connector, this will
connect to SPI Port 2 on the PIC microcontroller.
Align Pin1 to RE2
