Installation and Operation
2014 Microchip Technology Inc.
DS50002300A-page 19
2.7
SOFTWARE INSTALLATION
To begin using the UCS81003 Evaluation Board, software must be installed on a
Windows
®
-based computer with a USB port.
1. Download the software archive from the board’s web page, unzip it and
double-click the
Setup.exe
shows the initial
installation screen, which displays briefly as the setup program loads.
FIGURE 2-6:
Software Installation – Initialize Window.
2. Click
Next
in the Destination Directory window, as shown in
. For proper
operation, the files must be installed in the default locations. The default location
for the software files is
C:\Program Files(x86)\Microchip\UCS81003\
,
while for the LabVIEW software is
C:\Program Files(x86)\National
Instruments
.
FIGURE 2-7:
Software Installation – Setting the Destination Directory.
