Microchip Technology UCS1003-1, User Manual, Page: 38 / 53

UCS1003-1 Evaluation Board User’s Guide
DS50002510A-page 38

2016 Microchip Technology Inc.
4.3.4 Register Set Tab
The
Register Set
tab ( Figure 4-14 ), allows viewing and updating of the UCS1003-1
registers, identifies the device on the evaluation board and manages configuration files.
FIGURE 4-14: Register Set Tab.
4.3.4.1 REGISTER CONTENT
Register Content shown in Figure 4-14 is a scrollable list of the UCS1003-1 registers
and the current value. It is important to note that not all addresses are physical memory
locations on the device; these registers will read ‘
0
’. Likewise, some registers shown,
that are undocumented in the data sheet, may contain data. Editing these registers can
cause unexpected results.
To update a register value, locate the register address in the left column, type the new
value in the corresponding cell in the right column, and press
Enter
on the keyboard or
click outside the editable field to complete the action.
4.3.4.2 PRODUCT INFORMATION
Product Information panel shows the values of three registers (FDh, FEh and FFh)
which identify the device on the evaluation board.
Register Set tab
selected
Load/Save Register Register content list
Product
section
Information