Page | 5
Overview:
The following steps will show you how to:
1. Set up the hardware.
2. Configure the module on the evaluation kit.
3. Associate with a network.
4. Discover the module on the network via UDP broadcast.
5. Send data to your lab partner using TCP.
Part 1: Hardware Setup
1. Connect the evaluation board.
a. Connect the RN-131-EK board to your computer using the USB cable.
b. Use the device manager to find the COM port. See the following figures.
2. Launch the Tera Term terminal software from your PC.
a. Choose
Serial
.
b. In the drop-down menu, select the COM port you found in step 1b.
