TC1047A Temperature-to-Voltage Converter PICtail™ Demo Board User’s Guide
DS51483B-page 8
©
2006 Microchip Technology Inc.
2.3.1
Hardware Setup
1. Connect the P1 header of the TC1047A Temperature-to-Voltage Converter
PICtail™ Demo Board to the J3 connector on the PICkit 1 Flash Starter Kit
board. Refer to Figure 2-2 for proper orientation of the TC1047A
Temperature-to-Voltage Converter PICtail™ Demo Board and Figure 2-3 for
the simplified board schematic.
2. Insert the PIC16F676 into the Evaluation socket of the PICkit 1 Flash Starter Kit
board.
3. Connect the PICkit 1 Flash Starter Kit USB cable from the USB port of the PC to
the USB port (J1) on the PICkit 1 Flash Starter Kit board. +5V power is supplied
to the PICkit 1 Flash Starter Kit board via the USB cable. The green
POWER
LED
and the red
BUSY
LED will turn on, indicating that power is being supplied to the
board.
FIGURE 2-2:
TC1047A PICtail™ Daughter Board and PICkit™ 1 Flash Starter Kit.
FIGURE 2-3:
Simplified TC1047A PICtail™ Daughter Board Schematic.
TC1047A PICtail™ Demo Board
PICkit™ 1 FLASH Starter Kit
USB Cable
Expansion
Header (J3)
LED D7
LED D0
Insert
PIC16F676
0.1 µF
C
1
1
2
3
+5V
13
10
14
PICkit™ 1
FLASH Starter Kit
TC1047A PICtail™ Demo Board
J3
13
10
14
P1
To ADC RC0
GND
V
SS
V
DD
U1
(SOT23-3)
V
OUT
