SC70-6 and SOT-23-6/8 to DIP-8 Evaluation Board User’s Guide
DS51874A-page 18
©
2009 Microchip Technology Inc.
2.4.5
PICkit Serial or In-Circuit Serial Programming (ICSP) Interface
(Header J1)
Figure 2-5 shows the interface connection of Header J1. The VDD and VSS signals are
connected to the appropriate power or ground plane. The other four signals are open
and can be easily jumpered to any of the eight P1 through P8 connection points.
FIGURE 2-5:
PICkit Serial / ICSP Interface Connections.
Top-Layer Traces
Bottom-Layer Traces
Ground Plane
Power Plane
Note:
Silk Screen on Top Layer
indicates PICkit Serial I
2
C
signals, while Silk Screen on
Bottom Layer indicates
PICkit Serial SPI signals.
