background image

The Microchip Web Site

Microchip provides online support via our web site at 

http://www.microchip.com/

. This web site is used as

a means to make files and information easily available to customers. Accessible by using your favorite
Internet browser, the web site contains the following information:

Product Support

 – Data sheets and errata, application notes and sample programs, design

resources, user’s guides and hardware support documents, latest software releases and archived
software

General Technical Support

 – Frequently Asked Questions (FAQ), technical support requests,

online discussion groups, Microchip consultant program member listing

Business of Microchip

 – Product selector and ordering guides, latest Microchip press releases,

listing of seminars and events, listings of Microchip sales offices, distributors and factory
representatives

Customer Change Notification Service

Microchip’s customer notification service helps keep customers current on Microchip products.
Subscribers will receive e-mail notification whenever there are changes, updates, revisions or errata
related to a specified product family or development tool of interest.

To register, access the Microchip web site at 

http://www.microchip.com/

. Under “Support”, click on

“Customer Change Notification” and follow the registration instructions.

Customer Support

Users of Microchip products can receive assistance through several channels:

Distributor or Representative

Local Sales Office

Field Application Engineer (FAE)

Technical Support

Customers should contact their distributor, representative or Field Application Engineer (FAE) for support.
Local sales offices are also available to help customers. A listing of sales offices and locations is included
in the back of this document.

Technical support is available through the web site at: 

http://www.microchip.com/support

Microchip Devices Code Protection Feature

Note the following details of the code protection feature on Microchip devices:

Microchip products meet the specification contained in their particular Microchip Data Sheet.

Microchip believes that its family of products is one of the most secure families of its kind on the
market today, when used in the intended manner and under normal conditions.

There are dishonest and possibly illegal methods used to breach the code protection feature. All of
these methods, to our knowledge, require using the Microchip products in a manner outside the
operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is
engaged in theft of intellectual property.

Microchip is willing to work with the customer who is concerned about the integrity of their code.

 SAMC21N Xplained Pro

©

 2017 Microchip Technology Inc.

 User Guide

DS70005318A-page 38

Summary of Contents for SAMC21N Xplained Pro










































Reviews: