manualshive.com logo in svg

Microchip Technology SAMA5D3 XPLAINED, User Manual

Share
Download
Microchip Technology SAMA5D3 XPLAINED User Manual Download Page 23

Software Configuration and Operation

 2018 Microchip Technology Inc.

DS50002789A-page 23

FIGURE 4-3:

FTDI TTL-232R USB-SERIAL CABLE CONNECTION TO 
HEADER J10

3. On the PC, open a serial port session using TeraTerm, PuTTY or similar commu-

nication software. The settings are 115200 baud, 8 bits, no parity, 1 Stop bit 
(8N1).

4. The MPU outputs text as shown in 

Figure 4-4

 when it powers up.

FIGURE 4-4:

LINUX LOGIN PROMPT

5. The login is “root” (no quotes). No password is required.
6. The Linux file system root is located with command: cd /

4.3

SOFTWARE VERSION

The software installed on the board may not be the latest revision. Users are encour-
aged to compare the installed software version with the latest version available on the 
Microchip website and update it if necessary. The software version can be checked as 
follows:

# cat/sys/class/net/eth0/sw/version

Summary of Contents for SAMA5D3 XPLAINED

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands