RN4870/71 PICtail™/PICtail Plus Daughter Board User’s Guide
DS50002547A-page 44
2016 Microchip Technology Inc.
6. Click the
Connect
button and verify the “Port connect -> COMxx” is displayed in
the text box.
7. Verify firmware update is successfully completed. The “End of Write Memory”
message is displayed.
8. Click the
Disconnect
button to close the COM port. The “port disconnect” mes-
sage is displayed as indicated in
FIGURE A-2:
DISCONNECT ISUPDATE.COM FROM MODULE
9. Set SW7 to the ‘1’ position for Application mode.
10. Open TeraTerm and connect to the module.
11. Press SW5 to reboot the module. Ensure that the
%REBOOT%
message is dis-
played.
12. Enter Command mode by sending
$$$
escape sequence.
13. Enter the
V
command and verify firmware version as illustrated in
.
FIGURE A-3:
VERIFY FIRMWARE VERSION
