2014-2022 Microchip Technology Inc.
DS50002279D-page 19
RN4020
by VCCI:
http://www.vcci.jp/vcci_e/index.html
8.6.1
LABELING AND USER
INFORMATION REQUIREMENTS
The label on the final product which contains the
RN4020 module must follow Japan marking
requirements. The integrator of the module should refer
to the labeling requirements for Japan available at the
Ministry of Internal Affairs and Communications (MIC)
website.
The RN4020 module is labeled with its own technical
conformity mark and certification number. The final
product in which this module is being used must have
a label referring to the type certified module inside:
8.6.2
4.6.2 HELPFUL WEB SITES
Ministry of Internal Affairs and Communications (MIC):
http://www.tele.soumu.go.jp/e/index.htm
Association of Radio Industries and Businesses
(ARIB):
http://www.arib.or.jp/english/
8.7
Korea
The RN4020 module has received certification of con-
formity in accordance with the Radio Waves Act. Inte-
gration of this module into a final product does not
require additional radio certification provided installa-
tion instructions are followed and no modifications of
the module are allowed.
8.7.1
LABELING AND USER
INFORMATION REQUIREMENTS
The label on the final product which contains the
RN4020 module must follow KC marking requirements.
The integrator of the module should refer to the labeling
requirements for Korea available on the Korea
Communications Commission (KCC) website.
The RN4020 module is labeled with its own KC mark.
The final product requires the KC mark and certificate
number of the module:
8.7.2
HELPFUL WEB SITES
Korea Communications Commission (KCC):
National Radio Research Agency (RRA):
8.8
Taiwan
The RN4020 module has received compliance
approval in accordance with the Telecommunications
Act. Customers seeking to use the compliance
approval in their product should contact Microchip
Technology sales or distribution partners to obtain a
Letter of Authority.
Integration of this module into a final product does not
require additional radio certification provided installa-
tion instructions are followed and no modifications of
the module are allowed.
8.8.1
LABELING AND USER
INFORMATION REQUIREMENTS
The RN4020 module is labeled with its own NCC mark
and certificate number as below:
The user's manual should contain below warning (for
RF device) in traditional Chinese:
注意
!
依據
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電
機，非經許可，
公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計
之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛
航安全及干擾合法通信；
經發現有干擾現象時，應立即停用，並改善
至無干擾時方得繼續使用。
前項合法通信，指依電信規定作業之無線電
信。
低功率射頻電機須忍受合法通信或工業、科
學及醫療用電波輻射性
電機設備之干擾。
Contains transmitter module with certificate number:
MSIP-CRI-029-RN4020