Microchip Technology RN-2483-PICtail, User Manual

Page: 13 / 26

Overview

2015 Microchip Technology Inc.
Advance Information
DS50002366A-page 13
1.3 CONTENTS
The package kit contents contain the following tools as listed in Table 1-1 .
1.4 BOARD CONFIGURATION
Prior plugging the module into the motherboard's socket, ensure that one of the current
measure jumpers, CUR1 or CUR2, are shunted.
PICtail Daughter Board can be powered from two sources, either from one of the
PICtail headers or from USB. Both power sources can be active at the same time.
RF antennas must be connected to the SMA connectors prior attaching power to the
board.
Ensure that the applied power supply voltage does
not exceed the board limits.
Figure 1-2 , Figure 1-3 , and Figure 1-4 show the connection to various development
boards.
FIGURE 1-2: RN2483 LORA™ TECHNOLOGY PICtail™/PICtail PLUS
DAUGHTER BOARD CONNECTED TO EXPLORER 16
DEVELOPMENT BOARD
TABLE 1-1: RN2483 LORA™ TECHNOLOGY PICtail™/PICtail PLUS
DAUGHTER BOARD
Description Part Number
RN2483 LoRa™ Technology PICtail™/PICtail Plus
Daughter Board RN-2483-PICtail
USB Cable —
433 MHz antenna —
868 MHz antenna —