Microchip Technology PRO MATE II, Manual

Page: 24 / 48

PRO MATE
®
II Device Support
DS30243H-page 20

1999 Microchip Technology Inc.
Figure 3.1: Device Programmer Dialog – HCS200
The next step is to click on the Program button. The user will then be
prompted for two 20-bit custodian keys (Figure 3.2). These are combined to
form the manufacturer’s code. The manufacturer’s key is used in key
generation as described later in this document.
Figure 3.2: Enter Key Dialog – Custodian Key 1
The appropriate dialog for the selected device will be displayed (Figure 3.3).
The user should then select a Decoder. Some of the decoders have multiple
key generation methods. If the selected decoder has different key generation
options, the user will be prompted to select these options at that time. After
this, the user should select the encoder options as desired. These options are
described later in this document for each HCS device.
Once all options are selected, programming can begin. Click Program to
program the device or Close to exit without programming.