Monitoring Signals
2020 Microchip Technology Inc.
DS50002997A-page 31
Attributes of the component appear in the Probe window. Select the desired signal.
Connect a Scope to the Probe and start the simulation (Ctrl+T).
FIGURE 7-18:
Probe Connection to Scope.
FIGURE 7-19:
Probe Signal Plotted in Scope.
7.6
MONITORING SUBSYSTEM SIGNALS WITH PROBE
To simplify the measurement of various circuits and subsystems, the Vienna PFC
model includes predefined probes within the power stage and controller schematics.
Additionally, the top-level subsystems have signals available that only require a probe
and scope. For example, the PWM input and output signals of the Modulator are
accessible by dragging the Modulator onto a Probe window.
FIGURE 7-20:
Available Subsystem Signals in Probe Dialog Window.
