MRF24J40ME PICtail™/PICtail PLUS
DAUGHTER BOARD USER’S GUIDE
2015 Microchip Technology Inc.
DS50002335A-page 7
Preface
INTRODUCTION
•
•
Conventions Used in this Guide
•
•
•
Development Systems Customer Change Notification Service
•
•
DOCUMENT LAYOUT
This document describes how to use the MRF24J40ME PICtail™/ PICtail Plus
Daughter Board as a development tool to emulate and debug firmware on a target
board, as well as how to program devices. The document is organized as follows:
•
– This chapter provides a brief overview of the
MRF24J40ME PICtail™/ PICtail Plus Daughter Board, including board contents
and features.
•
– This chapter describes how to start using your
MRF24J40ME PICtail™/ PICtail Plus Daughter Board.
•
Appendix A. “MRF24J40ME PICtail™/ PICtail Plus Daughter Board
Schematics”
– This appendix contains the schematics, PCB information and Bill
of Materials for the MRF24J40ME PICtail™/ PICtail Plus Daughter Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(
www.microchip.com
) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
