PICDEM™ TOUCH SENSE 2 DEMO
BOARD USER’S GUIDE
©
2008 Microchip Technology Inc.
DS51748A-page 1
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before you use the
PICDEM Touch Sense 2 Demo Board. Items discussed in this chapter include:
• Conventions Used in this Guide
• Development Systems Customer Change Notification Service
DOCUMENT LAYOUT
This document describes how to use the Touch Sense 2 Demo Board as a development
and demonstrative tool for PIC24F MCU device capabilities and features. The manual
layout is as follows:
• Chapter 1. Introduction to the Demo Board –
This chapter introduces the
Touch Sense 2 Demo Board and provides an overview of its features.
•
Chapter 2. The Demonstration Application
– This chapter describes the
preprogrammed capacitive touch sense demo application.
•
Chapter 3. Using the mTouch™ Sensing Solution
– This chapter describes the
diagnostic software and how to use it with the Touch Sense 2 Demo Board.
•
Chapter 4. Demo Board Hardware
– This chapter provides a functional overview
of the Touch Sense 2 Demo Board and identifies the major hardware components.
•
– This chapter provides troubleshooting tips for
commonly encountered issues.
•
Appendix A. Demo Board Schematics
– This appendix provides detailed
schematic diagrams of the demo board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
