manualshive.com logo in svg

Microchip Technology PIC18F57Q43 Curiosity Nano, Hardware User'S Manual

Share
Download
Microchip Technology PIC18F57Q43 Curiosity Nano Hardware User'S Manual Download Page 2

Table of Contents

Preface........................................................................................................................................................... 1

1.

Introduction............................................................................................................................................. 3

1.1.

Features....................................................................................................................................... 3

1.2.

Kit Overview................................................................................................................................. 3

2.

Getting Started........................................................................................................................................ 4

2.1.

Quick Start....................................................................................................................................4

2.2.

Design Documentation and Relevant Links................................................................................. 4

3.

Curiosity Nano.........................................................................................................................................5

3.1.

On-Board Debugger Overview..................................................................................................... 5

3.2.

Curiosity Nano Standard Pinout................................................................................................. 10

3.3.

Power Supply............................................................................................................................. 11

3.4.

Low Power Measurement...........................................................................................................15

3.5.

Programming External Microcontrollers..................................................................................... 16

3.6.

Connecting External Debuggers................................................................................................ 19

4.

Hardware User Guide........................................................................................................................... 21

4.1.

Connectors................................................................................................................................. 21

4.2.

Peripherals................................................................................................................................. 22

5.

Hardware Revision History and Known Issues..................................................................................... 24

5.1.

Identifying Product ID and Revision........................................................................................... 24

5.2.

Revision 3...................................................................................................................................24

6.

Document Revision History...................................................................................................................25

7.

Appendix............................................................................................................................................... 26

7.1.

Schematic...................................................................................................................................26

7.2.

Assembly Drawing......................................................................................................................28

7.3.

Curiosity Nano Base for Click boards

™

...................................................................................... 29

7.4.

Disconnecting the On-board Debugger......................................................................................30

The Microchip Website.................................................................................................................................32

Product Change Notification Service............................................................................................................32

Customer Support........................................................................................................................................ 32

Microchip Devices Code Protection Feature................................................................................................ 32

Legal Notice................................................................................................................................................. 32

Trademarks.................................................................................................................................................. 33

Quality Management System....................................................................................................................... 33

Worldwide Sales and Service.......................................................................................................................34

 PIC18F57Q43 Curiosity Nano

©

 2020 Microchip Technology Inc.

 

DS40002186A-page 2

Summary of Contents for PIC18F57Q43 Curiosity Nano



































Reviews:

No comments

Brands by name

Popular brands

Load more brands