Figure 3-11. Connecting the MPLAB
®
PICkit
™
4 In-Circuit Debugger/Programmer to PIC16F15244 Curiosity
Nano
2
3
4
5
6
7
8
1
MCLR
V
DD
Ground
DATA
CLOCK
3 = Ground
4 = PGD
5 = PGC
6 = Unused
7 = Unused
8 = Unused
2 = VDD
1 = MCLR
MPLAB® PICkit™ 4
USB
DEBUGGER
PS LED
NC
ID
CDC RX
CDC TX
DBG1
DBG2
VBUS
VOFF
DBG3
DBG0
GND
VTG
CURIOSITY NANO
CAUTION
The MPLAB PICkit 4 In-circuit Debugger/Programmer is capable of delivering high voltage on the MCLR
pin. R110 can be permanently damaged by the high voltage. If R110 is broken, the on-board debugger can
not enter Programming mode of the PIC16F15244, and will typically fail at reading the device ID.
CAUTION
To avoid contention between the external debugger and the on-board debugger, do not start any
programming/debug operation with the on-board debugger through MPLAB
®
X IDE or mass storage
programming while the external tool is active.
PIC16F15244 Curiosity Nano
Curiosity Nano
©
2020 Microchip Technology Inc.
User Guide
DS50003045A-page 23
