Quick Start Instructions
©
2009 Microchip Technology Inc.
DS51793A-page 11
7.
Select the V
DD
voltage of the MCP3421 SOT23-6 Evaluation Board and click the
Next
button.
Case 1: When you use V
DD
from the PICkit Serial Analyzer:
If you choose
PICkit Serial will power my device
and
5 Volt
as shown below,
the MCP3421 SOT23-6 Evaluation Board is powered by the 5V DC from the
PICkit™ Serial Analyzer through the JP1 jumper. In this case, make sure that the
JP1 jumper on the MCP3421 SOT23-6 Evaluation Board is connected.
Case 2: When you use your own V
DD
:
You can also provide your own V
DD
voltage by applying a V
DD
voltage at the V
DD
test point on the board. In this case, make sure the JP1 jumper is disconnected.
FIGURE 1-7:
Step 4 - Voltage Source Selection Window.
