MCP19114 - Flyback Stand-Alone Evaluation Board User’s Guide
DS50002255A-page 24
2014 Microchip Technology Inc.
3.2.3
Control Buttons
The two buttons on the left are user selectable self-test options. The
Initialize PICkit
Serial
button checks communication between your computer and PICkit Serial
Analyzer. The
Check for Evaluation Board
can be selected by the user to manually
ask software to detect the evaluation board.
The
Update
button will apply the configuration settings made in Operating Mode,
Parameters, Protection, Switches Enable/Disable, Advanced Register Update and will
turn on the output drivers. It will
not
update the Register Online Adjust section.
The Turn Off Drivers button is a Master Stop that shuts off the output drivers. Pressing
this button will disable both Primary and Secondary drivers.
FIGURE 3-8:
Control Buttons.
3.2.4
Operating Status Box
This box provides messages to the user and operating status. Examples of status mes-
sages are shown in
.
FIGURE 3-9:
Operating Status Box.
Summary of Contents for MCP19114
Page 27: ...Schematic and Layouts 2014 Microchip Technology Inc DS50002255A page 27 A 3 BOARD TOP LAYER...
Page 29: ...Schematic and Layouts 2014 Microchip Technology Inc DS50002255A page 29 A 5 BOARD MID LAYER 1...
Page 35: ...Bill of Materials BOM 2014 Microchip Technology Inc DS50002255A page 35 NOTES...
