MCP1252 CHARGE PUMP BACKLIGHT
LED DEMO BOARD USER’S GUIDE
©
2005 Microchip Technology Inc.
DS51551A-page 1
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
MCP1252 Charge Pump Backlight LED Demo Board. Items discussed in this chapter
include:
• Conventions Used in this Guide
DOCUMENT LAYOUT
This document describes how to use the MCP1252 Charge Pump Backlight LED Demo
Board. The manual layout is as follows:
• Chapter 1. “Product Overview” – Important information about the MCP1252
Charge Pump Backlight LED Demo Board.
• Chapter 2. “Installation and Operation” – Includes instructions on how to get
started with this user’s guide and a description of the user’s guide.
• Appendix A. “Schematic and Layouts” – Shows the schematic and layout
diagrams for the MCP1252 Charge Pump Backlight LED Demo Board.
• Appendix B. “Bill-Of-Materials (BOM)” – Lists the parts used to build the
MCP1252 Charge Pump Backlight LED Demo Board.
• Appendix C. “00016R1.asm Source Code” – Provides information about the
application firmware and where the source code can be found.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.
