Hardware Configuration
2019 Microchip Technology Inc.
DS50002887A-page 19
FIGURE 3-5:
BOARD POWER LEDS AND TEST LOOPS
3.1.4
Reset
An on-board reset button is included which resets the USB7056 when pressed. A reset
header (J11) is also included, which holds the USB7056 in reset when a shunt is
installed across the header. A red LED indicator also illuminates when the reset signal
is asserted (active low). The locations of these components are shown in
.
FIGURE 3-6:
RESET BUTTON LOCATION
5V LED Indicator
(D15)
3.3V LED Indicator
(D18)
1.2V LED Indicator
(D19)
GND Test Loop
(TP21)
5V Test Loop
(TP22)
3.3V Test Loop
(TP23)
1.2V Test Loop
(TP25)
Reset LED
(D11)
Reset Header
(J10)
Reset button
(SW2)
