dsPICDEM™ MCLV-2 DEVELOPMENT
BOARD USER’S GUIDE
2012 Microchip Technology Inc.
DS52080A-page 27
Chapter 3. Running a BLDC Motor Using a Sensorless
Algorithm
This chapter describes how to set up the dsPICDEM MCLV-2 Development Board in
the Internal Op amp configuration to run a BLDC motor using the Single-Shunt Current
Reconstruction Algorithm using a dsPICDEM™ MCLV-2 Development Board. The
algorithm is described in AN1299
“Single-Shunt Three-Phase Current Reconstruction
Algorithm for Sensorless FOC of a PMSM”
.
Topics covered include:
•
•
dsPICDEM MCLV-2 Development Board Setup
3.1
OPERATING REQUIREMENTS
To set up and run the board, the following items are recommended:
• MPLAB
®
X Integrated Development Environment (IDE) installed on the PC that is
attached to the board (SW007002)
• dsPICDEM MCLV-2 Development Board (DM330021-2)
• 24V power supply (AC002013) or equivalent
• 10 pole Hurst motor (AC300020)
• dsPIC33EP256MC506 Internal Op Amp Configuration PIM (MA330031)
