Microchip Technology DN2470, User Manual

Page: 7 / 26

DN2470 BASED LINEAR REGULATOR
INPUT VOLTAGE RANGE EXTENDER
EVALUATION BOARD USER’S GUIDE

2016 Microchip Technology Inc. DS50002464A-page 7
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
DN2470 Based Linear Regulator Input Voltage Range Extender Evaluation Board
User’s Guide. Items discussed in this chapter include:
• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Web Site
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the DN2470 Based Linear Regulator Input
Voltage Range Extender Evaluation Board User’s Guide as a development tool.
•
Chapter 1. “Product Overview” – Important information about the DN2470
Based Linear Regulator Input Voltage Range Extender Evaluation Board User’s
Guide.
• Chapter 2. “Installation and Operation” – This chapter includes a detailed
description of each function of the demonstration board and instructions on how to
use the board.
• Appendix A. “Schematic and Layouts” – Shows the schematic and layout
diagrams for the DN2470 Based Linear Regulator Input Voltage Range Extender
Evaluation Board User’s Guide.
• Appendix B. “Bill of Materials (BOM)” – Lists the parts used to build the
DN2470 Based Linear Regulator Input Voltage Range Extender Evaluation Board
User’s Guide.
• Appendix C. “DN2470 Characterization Plots” – Describes the various plots
and waveforms for the DN2470 Based Linear Regulator Input Voltage Range
Extender Evaluation Board User’s Guide.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(
www.microchip.com ) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.