Microchip Technology Curiosity Nano PIC16F15276 Hardware User'S Manual Download

Page: 1 / 37

PIC16F15276 Curiosity Nano Hardware User Guide

Preface

The PIC16F15276 Curiosity Nano evaluation kit is a hardware platform to evaluate microcontrollers in the
PIC16F152XX family. This board has the PIC16F15276 microcontroller (MCU) mounted.

Supported by MPLAB

X IDE, the board provides easy access to the features of the PIC16F15276 to explore how to

integrate the device into a custom design.

The Curiosity Nano series of evaluation boards include an on-board debugger. No external tools are necessary to
program and debug the PIC16F15276.

•

MPLAB

X IDE

- Software to discover, configure, develop, program, and debug Microchip microcontrollers.

•

Code examples on GitHub

- Get started with code examples.

•

PIC16F15276 website

- Find documentation, data sheets, sample, and purchase microcontrollers.

•

PIC16F15276 Curiosity Nano website

- Kit information, latest user guide, and design documentation.

2021 Microchip Technology Inc.

User Guide

DS50003143A-page 1

Summary of Contents for Curiosity Nano PIC16F15276






































Search results

Summary of Contents for Curiosity Nano PIC16F15276

Reviews:

Related manuals for Curiosity Nano PIC16F15276

Brands by name

Popular brands

Microchip Technology Curiosity Nano PIC16F15276, Hardware User'S Manual

Search results

Summary of Contents for Curiosity Nano PIC16F15276

Reviews:

Related manuals for Curiosity Nano PIC16F15276

Brands by name

Popular brands