CL88030
230 V
AC
OFFLINE LED DRIVER
EVALUATION BOARD USER’S GUIDE
2018 Microchip Technology Inc.
DS50002772A-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
CL88030 230 V
AC
Offline LED Driver Evaluation Board. Items discussed in this chapter
include:
•
•
Conventions Used in this Guide
•
•
•
•
DOCUMENT LAYOUT
This document describes how to use the CL88030 230 V
AC
Offline LED Driver Evalu-
ation Board as a development tool. The manual layout is as follows:
•
– Important information about the CL88030 230
V
AC
Offline LED Driver Evaluation Board.
•
Chapter 2. “Installation and Operation”
– Includes instructions on how to get
started with the CL88030 230 V
AC
Offline LED Driver Evaluation Board and a
detailed description of each function.
•
Appendix A. “Schematic and Layouts”
– Shows the schematic and layout
diagrams for the CL88030 230 V
AC
Offline LED Driver Evaluation Board.
•
Appendix B. “Bill of Materials (BOM)”
– Lists the parts used to build the
CL88030 230 V
AC
Offline LED Driver Evaluation Board.
•
Appendix C. “Plots and Waveforms”
– Describes the plots and waveforms for
the CL88030 230 V
AC
Offline LED Driver Evaluation Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(
www.microchip.com
) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
