Programming and Testing
2018 Microchip Technology Inc.
DS50002727A-page 17
4. Programming the SPI Flash with
DediProg SF100
:
a) Connect the Dediprog SF100 to J2 on CEC1702 PIM board as follows:
b) Install jumper T1 on CEC1702 PIM board before programming.
c) Open the Dediprog Software then select the SPI Flash chip ID: 26VF016B.
Click
OK
.
d) Options settings: Press the
Config
button.
DediProg SF100
CEC1702 PIM
VCC
<1> VCC_3.3V
MOSI
<2> JTAG_TMS/SHD_SIO0
SCK
<4> JTAG_TCK/SHD_SCK
MISO
<6> JTAG_TDO/SHD_SIO1
CS
<7> SHD_CS0
GND
<9> GND
Note:
Please install SFv6.0.4.41 or later, older versions may not able to detect the
device.
