CAP1xxx Evaluation Board User’s Guide
DS50002221A-page 32
2013 Microchip Technology Inc.
5 GUI Sensor Control Tab
The Sensor Control tab provides the detailed controls for individual sensor inputs.
shows
the default view for the CAP1298 Evaluation Board.
The Sensor Control Panel has 2 sections: individual sensor inputs (see
Section 4.1
) and all sensor
5.1 All Sensor Input Settings
The All Sensor Settings display, shown in
, has the controls for all the sensor inputs. A check
mark represents a ‘1’ in logic.
The 'Sensor Enable' column determines which sensors are scanned in Active mode.
The 'Sensor Interrupt' column determines which sensors produce an interrupt when a touch is
detected.
Figure 5.1 Sensor Control Tab
for the CAP1188 Evaluation Board
