Microchip Technology BM83 EVB, User Manual

Page: 11 / 73

3.1 Hardware Features
The following sections provide detailed information on the BM83 EVB components. To locate these components in
the BM83 EVB, refer to
Figure 2-1 and Figure 3-2 .
Figure 3-2. BM83 EVB Switches, LEDs, and Jumpers
Dxxx - LEDs
JPxxx/Jxxx - Jumpers
Sxxx/SWxxx - Switches/Push buttons
Legends:
D401
D402 D403 D404 D405 D406 D407
D41
1
S400
SW402 SW403 SW400
SW705 SW702 SW707 SW708 SW704 J600
D401
D402 D403 D404 D405 D406 D407
D41
1
S400
SW402 SW403 SW400
SW200
SW701
SW401
SW711
SW703
D202
D600
D203
D209
JP203
JP201
JP400
J200
JP600, JP601
D300, D301, D302
SW700
SW300
J700, J701, J702
J404
J405
JP501
JP503
J401, J402, J403
JP305
JP304
J505, J504
3.1.1 Power Supply
The BM83 EVB can be powered using any one of the following:
• Li-ion battery (J201) – when using a battery input, mount a jumper on JP200 and pin 1 and 2 of JP201. Do not
mount a jumper on JP202. JP202 is a provision for connecting a battery power source with 2.54 mm connector.
• 15V DC power adapter (P200)
• USB (J200 and J600) – USB cable is connected to the PC which provides 5V (USB_5V)
Note: Power switch (SW200) is utilized to switch between two 5V power sources available on board:
• 5V_DC: derived from 15V DC
• 5V_USB: supplied by 5V USB source
Note: To locate these power sources available on the BM83 EVB, refer to Figure 2-1 .
BM83 EVB
Hardware
©
2019 Microchip Technology Inc.
User Guide
DS50002902A-page 11