5.
Regulatory Approval
The AVR-IoT Wx development board has been testedby the following standards:
Emission:
• FCC Part 15 subpart B:2018 (Class B)
• EN55032:2015 (Class B)
Immunity:
• EN55024:2010+A1:2015
• EN61000-4-2:2009 (contact: level 2 (±4 kV), air: level3 (±8 kV))
• EN61000-4-3:2006+A2:2010 (80 - 1000 MHz, level 2 (3 V/M))
• EN61000-4-8:2010 (level 2 (3 A/m), continuous field)
The development board contains the wireless transmitter module ATWINC1510-MR210PB, which has the following
approval and/or registrations:
• United States/FCC ID: 2ADHKATWINC1510
• Canada
– IC: 20266-ATWINC1510
– HVIN: ATWINC1510-MR210PB
– PMN: ATWINC1510-MR210PB
• Europe - CE
• Japan/MIC: 005-101762
• Korea/KCC: R-CRM-mcp-WINC1510MR210P
• Taiwan/NCC: CCAN18LP0320T0
• China/SRRC: CMIIT ID: 2018DJ1310
5.1
United States
Contains Transmitter Module FCC ID: 2ADHKATWINC1510.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
5.2
Canada
Contains IC: 20266-ATWINC1510.
This device complies with Industry Canada's license-exempt RSS standard(s). Operation is subject to the following
two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
AVR-IoT Wx Hardware User Guide
Regulatory Approval
©
2020 Microchip Technology Inc.
User Guide
DS50002805B-page 20
