Figure 5-75. Beacon Configuration Screen
8.
Update the URL, Tx Power mode, beacon period, etc. and then save. Now, disconnect from the
beacon and enter the ranging screen. Once disconnected, the beacon device (ATSAMB11-MR/ZR)
enters into Beacon mode and start sending Eddystone URL frames with the updated values. The
ranging console log screen shows the beacon with new URL value.
Figure 5-76. Eddystone Beacon Console Log
9.
The beacon configuration page also provides a reset button that can set all the parameters to
default factory settings.
ATSAMB11
©
2017 Microchip Technology Inc.
User Guide
DS70005335A-page 69