Microchip Technology ADM00732, User Manual

Page: 25 / 78

HV7358DB1 GUI Operation

2020 Microchip Technology Inc. DS50002951A-page 25
3.4 MUPB002 AND GUI/USB PROGRAMMING
Open and run the GUI by double clicking the HV7358DB1 icon. The GUI will open
showing the following screen:
FIGURE 3-1: Full GUI Screen.
At the bottom left hand corner, there should be the “USB Status: Connected” note, as
shown in
Figure 3-2 below.
FIGURE 3-2: USB Status Note.
When the MUPB002 board is connected to the PC, or when the GUI is started, the USB
should connect automatically. If it does not, there is a
USB Connect
button at the upper
right corner of the GUI. If it is required to disconnect the USB, there is also a
USB
Close
button. See Figure 3-3 below.
FIGURE 3-3: USB Connect and Close Buttons.