10-PIN MSOP AND 8-PIN MSOP
EVALUATION BOARD
USER’S GUIDE
2017 Microchip Technology Inc.
DS50002569A-page 33
Appendix A. Schematic and Layouts
A.1
INTRODUCTION
This appendix contains the following schematics and layouts for the 10-Pin MSOP and
8-Pin MSOP Evaluation Board:
• Board – Top Copper and Silk Layer
• Board – Bottom Copper and Silk Layer
A.2
SCHEMATICS AND PCB LAYOUT
Section A.3 “Board – Schematic”
shows the schematic of the 10-Pin MSOP and
8-Pin MSOP Evaluation Board.
Section A.4 “Board – Top Silk Layer”
shows the layout for the top layer of the 10-Pin
MSOP and 8-Pin MSOP Evaluation Board. The layer order is shown in Figure A-1.
FIGURE A-1:
Layer Order.
Top Layer
Ground Layer
Power Layer
Bottom Layer
