COPYWRITER PRO SERIES DUPLICATOR MICROBOARDS TECHNOLOGY, LLC
11
Copy Hard Drive (HDD) to CD
1. Follow the instructions on page 9 to register the Master CD to the HDD.
2. Press to NO key until the screen displays
Master Select?
3. Press the YES key.
4. The display will show READER.
5. Press the NO key and the display will show HDD1. If this is the hard drive
partition you wish to copy, press the YES key.
6. The screen will display COPY START? (HDD1 to DISC)
COPY START?
(HDD1 to DISC)
7. If you wish to select a different hard drive partition, press the NO key in step 5,
unit the display shows the partition you wish to copy.
8. Place the blank CD-R disc(s) into the Recorder(s) and wait 10 seconds for the
light(s) on the front of the Recorder(s) to stop blinking.
9. Press the Yes button.
10. The drive trays will open on any recorder without blank discs installed. If you do
not want to make a copy in those drives, close the tray(s), wait for the drive light
to go out, and then press the YES key to start the copy job.
11. The display will now show the progress of the copy job from the HDD to the
Recorder(s):
COPY 600MB
CDROM 15%
After the Copy job is complete, the CD-R disc(s) will be ejected from the
Recorder(s).
