5
©2011 Microban®
Maintenance
Cleaning and Storage
3
note:
ALWAYS
unplug the humidifier from the electrical
outlet before cleaning.
neveR
allow water to sit in the tank
when not in use.
daily Maintenance:
1. Turn off the humidifier and unplug it from the wall outlet.
2. Remove the tank unit by pulling it straight off the humidifier
base.
3. Turn the tank upside down and drain any water into a sink
or tub. Shake the unit gently to remove any remaining water.
4. Rinse the tank thoroughly with water, empty, and wipe with
a dry, clean cloth.
5. Wipe the humidifier base with a dry cloth if necessary.
6. Refill the tank as directed under “Initial Setup and
Operation” on page 4 and resume use.
Weekly Maintenance:
1. Turn off the humidifier and unplug it from the wall outlet.
2. Remove the tank unit by pulling it straight off the humidifier
base.
3. Turn the tank upside down and drain any water into a sink
or tub. Shake the unit gently to remove any remaining water.
4. Fill the water tank with a mixture of one (1) gallon of water
and eight (8) ounces of white vinegar. Leave the mixture in
the water tank for 20 minutes, giving the water tank a shake
every few minutes. After 20 minutes, give the water tank a
final shake and discard the mixture.
5. Rinse the water tank several times with clean water. Leave
the tank cap off to allow the water tank to dry completely.
6. Wipe the surfaces of the humidifier base with a soft damp
cloth.
7. Once all the parts are clean and dry, reassemble the
humidifier, refill the water tank, and resume use.
note:
The tank has built-in antimicrobial properties to inhibit
the growth of bacteria, mold, and fungi that may affect the water
in the tank. Daily and weekly maintenance is still necessary to
prevent the growth of bacteria, mold, and fungi.
