Micro SPARROW XL, User Manual

Page: 14 / 235

14
Repair
Cleaning
Have all repairs performed by an authorized dealer or an authorized service centre. Do
not carry out any repairs on electrical components yourself. Only a specialist may open
enclosures with built-in electrical components.
To prevent corrosion of the screws and unnecessary wear and tear, it is advisable to
thoroughly clean and dry the unit every three months and after every ride in the rain.
After cleaning, rinse the scooter with clean water to remove any traces of the cleaning
agent used. Then dry the scooter with a cloth.
Use device-specific cleaning agents and care
products as well as a soft sponge. Never use
solvents for cleaning and avoid cleaning the
scooter directly under running water.
Do not perform any cleaning or maintenance
when the power is on or the battery is
charging and do not spray liquid directly onto
any part of the vehicle.
NOTE
WARNING
Instructions for disposal
Pay attention to the environment during disposal and observe the following
instructions:
● Only dispose of the electric scooter and associated components (e.g. battery) at an
approved disposal company or via the community disposal facility.
● Observe the current regulations. If in doubt, consult your disposal
facility for environmentally sound disposal. Batteries and electrical
appliances must not be disposed of with domestic waste!
EN