for setup, maintenance and repair
WARNING
●
Do not modify the electric scooter or install incorrect accessories as this will put
your safety at risk.
●
The use of unauthorized accessories may result in serious injury or damage to the
electric scooter.
●
‘Customization’ or ’Tuning’ of the electric scooter is forbidden.
●
Do not hang items such as bags on the handlebar, as this will have an adverse effect
on the handling characteristics.
●
Incorrect tightening of screws may lead to material fatigue. Screws become soft
when they are subjected to excessive stress and may tear. This increases the risk of
accidents and injuries. Always use a torque spanner to tighten the screws.
●
Self-locking fixings can lose their effectiveness after several months.Regularly
check the tightening of the various bolted elements, in particular the wheel axles,
the folding system, the steering system and the brake shaft.
●
Always consult a specialist for repairs to the drive system.
●
Make sure that the bearings are properly maintained at all times.
●
The wheels may wear over time and should be replaced if necessary.
●
Eliminate any sharp edges caused by use.
11
●
It is recommended to fully charge the battery before using the scooter for the first
time.
●
Charge the battery at least once every 3 months even if the product is not in use.
Failure to do so may results in batteries that cannot longer accept any charge.
●
Noise emission: The A-weighted emission level is less than 70 dB(A).
●
Please contact the official Micro distributor in your market for further information
regarding the followings: 1. Lubrication recommendations: locations and frequency
of lubrication, recommended lubricant. 2. The method for adjusting the brakes and
recommendations concerning the replacement of friction components. 3. Method
for adjusting or setting all of the components that would need to be adjusted
regularly or after replacement of a part. 4. Where to find a qualified maintenance
shop for items that cannot be done by oneself (e.g. replacement of wear parts,
electronic components, tightening torques etc.)
●
The disk brake has to be checked and eventually tuned regularly to assure an
effective braing performance.
●
Only Micro Chargers are suitable for Micro e-scooters.
●
For a better waterproofness be sure to have the charging slot protection cover
always closed.
Micro_X21_Book.indb 11
Micro_X21_Book.indb 11
21.06.21 16:08
21.06.21 16:08
