iID
®
PENsolid UHF
User Manual
UserMan-iID PENsolid UHF-002E.DOCX
© 2017 microsensys
QuickStartGuide
Signs & their meaning
iID
®
PENsolid LEDs are used to show operation state. Additionally there are device states shown as
described below.
Symbol
Description
(3=ORANGE)
OFF = battery good, BLINK = low charge, ON = USB charging
(4=BLUE)
BLINK = Bluetooth
™ connection not established, ON = Bluetooth™ connection
established
(5) operation state LED
(GREEN)
In DOC mode automatic RF state visualization, in SPC mode free
programmable
(6) operation state LED
(RED)
In DOC mode automatic RF state visualization, in SPC mode free
programmable
(5) & (6)
Blinking while POWER_ON or POWER_OFF
Safety instructions
The device may only be used for the intended purpose designed by for the manufacturer.
Unauthorized changes and the use of spare parts and additional devices which have not
been sold or recommended by the manufacturer may cause fire, electric shocks or
injuries. Such unauthorized measures shall exclude any liability by the manufacturer.
The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are
valid for the device. The manufacturer shall not be held legally responsible for
inaccuracies, errors, or omissions in the manual or automatically set parameters for a
device or for an incorrect application of a device.
Repairs may only be executed by the manufacturer.
Installation, operation, and maintenance procedures should only be carried out by
qualified personnel.
Use of the device and its installation must be in accordance with national legal
requirements and local electrical codes.
When working on devices the valid safety regulations must be observed.
