manualshive.com logo in svg

Micro Rain MR 32, Instruction Manual For Operation And Maintenance, Page: 4 / 12

Share
Download
Micro Rain MR 32 Instruction Manual For Operation And Maintenance Download Page 4

Conditions For Machine Operation 

The MR32 is designed for clean water suitable for irrigation.  The machine is not designed for 
water that includes large pieces of debris or slurry/wastewater conditions. 

Start Up Procedure/Operation 

1)  

Push the machine to the desired location.  Position the ma-

chine with the sprinkler cart facing the direction to be irrigated.  
Insure that the machine is sitting level in order for the tube to 
wrap properly. 

2)  

Place the gearbox engage/disengage lever in the neutral po-

sition to prepare for hose pull out. 

3)  

Move anti-reverse lever to the disengage position as shown. 

4)  

After steps 2 and 3 have been performed, the sprinkler cart 

can be pulled out.  The cart may be pulled out by hand or by 
connecting the cart chain to a small garden tractor or ATV.   
 
 

IMPORTANT:   ALWAYS PULL CART OUT STRAIGHT AND AT 

A SLOW STEADY SPEED (ABOUT THE PACE OF A WALK).  
LEAVE 1-2 WRAPS ON THE DRUM TO KEEP FROM PULLING 
HOSE OFF THE DRUM.

 

Summary of Contents for MR 32













Reviews:

No comments