MOUNTING THE MACHINE
STARTING PROCEDURE
A. DURING INSTALLATION
-
INITIAL START
The machine should be mounted on a workbench of
sufficient height so that you do not need to bend your
back to perform normal operations.
Ensure the location is adequately lit and that you will
not be working in your own shadow.
We strongly recommend that the machine
e
bolted
firmly to a workbench
,
using the tapped holes to
secure the feet to the machine. This is to provide
added stability and
,
consequently, additional safety.
To do this, first drill three M6 clearance holes in a
worktop, at the dimensions shown in the diagram
opposite, and with appropriate length M6 bolts, or
screws, with flat washers
(not suppl
ied
)
.
Taking all precautions previous
ly
stated,
e
nsur
e t at
the cross-slide is well away from the chuck,
and the
c
lutch for manual
and
auto feeding is in
t e
left position
. C
lose the chu
ck'
protect
i e
cover
. I
nsert the electric plug into
t e
socket.
o ar e a e ir re ea e e
er ency o
i c A .
en e ec or ard or e er e a de ired
.
ina y ro a e e eed con ro
o e de ired eed
.
Run
t e a
ne or
a total 5 minutes
,
gradually
increas
n
spindle speed to its maximum. Run for at
least 2 minutes at this speed before stopping the
machine and disconnecting from the
main supply.
Check that all components are still secure and working freely and correctly.
Check also to ensure the mountings are secure.
CAU ION:
ALWAYS turn the machine OFF
i e
aria e
eed
S
i c and e or ard
e er e
Sw
i c
a e
in
o change any settings or make any adjustments.
6
B
A
420mm
85mm
