MICRO-MARK 89747 Instructions Download Page 4

Page: 4 / 4

Parts List

1. Air cap

2. Nozzle cap

3. Nozzle

4. Nozzle O-ring

5. Air cap seal O-ring 6.2*0.5mm

6. Airbrush body

7. M5 O-ring

8. M5 nylon needle seal

9. Trigger rocker

10. Trigger

11. Cup cover

12. Cup

13. Needle chuck

14. Trigger tensioning adjustment

15. Air intake valve seat O-ring (silicone O-ring)

16. 1/8 NPT intake (air hose adapter)

17. O-ring 8*1.5mm (barbed airline adapter)

18. 1/8 NPT knurled sleeve (barbed airline adapter)

19. Barbed arline adapter

20. Handle

21. Needle stop

22. Needle spring

23. Spring housing

24. Needle collet

25. Air valve screw

26. Needle

340 Snyder Avenue
Berkeley Heights, NJ 07922
www.micromark.com • [email protected]

Summary of Contents for 89747

Page 1: ...this is your first time using this airbrush we recommend using water for the first use to gain a feel for spray patterns produced at different distances from scrap paper cardboard or wood and to gain...

Page 2: ...paint inside the airbrush Disassembling the Airbrush Drain any remaining paint in the paint cup from the airbrush At the front of the airbrush remove the air cap 1 and nozzle cap 2 Once you have remo...

Page 3: ...can be abrasive but gentle enough to not damage the needle Repeat until you can no longer feel high spots with your fingernail If a paper towel is inadequate use extra fine steel wool steel wool for p...

Page 4: ...gger tensioning adjustment 15 Air intake valve seat O ring silicone O ring 16 1 8 NPT intake air hose adapter 17 O ring 8 1 5mm barbed airline adapter 18 1 8 NPT knurled sleeve barbed airline adapter...