Furthermore, we declare compliance with the following directives and standards including the modifications applicable at the time this
declaration is made:
- Directive 2006/42/EC (machinery)
EN ISO 13857: 2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs
EN 60204-1: 2006 + EN 60204-1: 2006/A1: 2009 Safety of machinery - Electrical equipment of machines - Part 1: General re-
quirements
- Directive 2014/30/EU (EMC)
EN 61326-1: 2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General re-
quirements
EN 61326-2-3: 2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particu-
lar requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote
signal conditioning
- Directive 2011/65/EU (RoHS)
EN 50581: 2012 Technical documentation for the assessment of electrical and electronic devices with respect to the restriction of
hazardous substances
We also declare that the special technical documentation for this partially completed machine has been created in accordance with
Annex VII, Part B, and commit ourselves to disclose this to the market surveillance authorities upon request.
The commissioning of these partially completed machines is prohibited until the partially completed machine(s) has/have been
installed in a machine that meets the requirements of the EC Machinery Directive and for which an EU Declaration of Conformity ac-
cording to Annex II, Part A exists.
Ortenburg, April 9th 2019
Dr. Thomas Wisspeintner
Managing
Director
Tel. +49 (0) 8542 / 168-0
e-mail [email protected]
Fax +49 (0) 8542 / 168-90
www.micro-epsilon.com
