Page 44
Electrical Installation
thermoIMAGER TIM
6.1
PIN Assignment of Connectors
PIF
1
INT
2
SDA (I
2
C)
3
SCL (I
2
C)
4
DGND
5
3.3 V (Out)
USB
1
VCC
2
GND
4
D-
View on connector side
5
D+
Fig. 17 Pin assignment of rear side of camera
In case you would like to connect the process interface of the camera directly to external hardware
1
(with-
out using the supplied PIF cable) you should activate the field “Support proprietary PIF cable” in the menu
Tools/ Configuration/ Device (PIF)
in the TIM Connect software.
Fig. 18 Screen Support proprietary PIF cable
1) We recommend using only a switching contact between INT and DGND as external hardware (button,
relay).
In case of working
with a direct PIF
connection the input
of the PIF is not
protected!
A voltage > 3 V on
the INT pin will de-
stroy the device!
